Tesseract: Royal Purple
THE TESSERACT: A 4 DIMENSIONAL HYPERCUBE
Features a proudly made in America dial. The Tesseract pattern is entirely milled, providing tangible depth, relief, and sharp perpendicular corners. Each dial has a polished surface which is contrasted by the matte surface of the milled pattern. After galvanic treatment (coloring) of the dial, some are treated with a semi matte lacquer - some are not. The highly polished dials number in the single digits, with the remainder semi-matte.
AMERICAN HOROLOGY
The dials are polished by hand before CNC milling with end mills that measure a fraction of a millimeter in diameter. The nameplate, beset by two entirely functional and hand polished screws, is no small feat in itself. The chamfers feature anglage (done by hand) with a satin grain applied to the face. The nameplate is only 0.20mm in thickness (a dime is about 1mm thick) which means handling them requires a great deal of skill, lest they be damaged irreparably. The Orion text on the nameplate is the Orion typeface and is milled as well as inked by hand. Milling specific typefaces is a technical challenge and is seldom featured in watches; the alternatives being lasering the text or simply using the profile of the cutter to create a typeface.
An understated and majestic purple that commands attention, not by being the center of it, but by its presence alone. The royal purple dial is paired with white rhodium colored hands and nameplate.
Technical Specifications
Hand finished, made in America dial
39mm Diameter
20mm Lug Width
47mm Lug to Lug
10.5mm Thickness (Caseback to Crystal)
Screw down crown
100m Water Resistance
Movement: Miyota 9039
Crystal Material: Sapphire
Lume: Blue BGW9
THE TESSERACT: A 4 DIMENSIONAL HYPERCUBE
Features a proudly made in America dial. The Tesseract pattern is entirely milled, providing tangible depth, relief, and sharp perpendicular corners. Each dial has a polished surface which is contrasted by the matte surface of the milled pattern. After galvanic treatment (coloring) of the dial, some are treated with a semi matte lacquer - some are not. The highly polished dials number in the single digits, with the remainder semi-matte.
AMERICAN HOROLOGY
The dials are polished by hand before CNC milling with end mills that measure a fraction of a millimeter in diameter. The nameplate, beset by two entirely functional and hand polished screws, is no small feat in itself. The chamfers feature anglage (done by hand) with a satin grain applied to the face. The nameplate is only 0.20mm in thickness (a dime is about 1mm thick) which means handling them requires a great deal of skill, lest they be damaged irreparably. The Orion text on the nameplate is the Orion typeface and is milled as well as inked by hand. Milling specific typefaces is a technical challenge and is seldom featured in watches; the alternatives being lasering the text or simply using the profile of the cutter to create a typeface.
An understated and majestic purple that commands attention, not by being the center of it, but by its presence alone. The royal purple dial is paired with white rhodium colored hands and nameplate.
Technical Specifications
Hand finished, made in America dial
39mm Diameter
20mm Lug Width
47mm Lug to Lug
10.5mm Thickness (Caseback to Crystal)
Screw down crown
100m Water Resistance
Movement: Miyota 9039
Crystal Material: Sapphire
Lume: Blue BGW9
THE TESSERACT: A 4 DIMENSIONAL HYPERCUBE
Features a proudly made in America dial. The Tesseract pattern is entirely milled, providing tangible depth, relief, and sharp perpendicular corners. Each dial has a polished surface which is contrasted by the matte surface of the milled pattern. After galvanic treatment (coloring) of the dial, some are treated with a semi matte lacquer - some are not. The highly polished dials number in the single digits, with the remainder semi-matte.
AMERICAN HOROLOGY
The dials are polished by hand before CNC milling with end mills that measure a fraction of a millimeter in diameter. The nameplate, beset by two entirely functional and hand polished screws, is no small feat in itself. The chamfers feature anglage (done by hand) with a satin grain applied to the face. The nameplate is only 0.20mm in thickness (a dime is about 1mm thick) which means handling them requires a great deal of skill, lest they be damaged irreparably. The Orion text on the nameplate is the Orion typeface and is milled as well as inked by hand. Milling specific typefaces is a technical challenge and is seldom featured in watches; the alternatives being lasering the text or simply using the profile of the cutter to create a typeface.
An understated and majestic purple that commands attention, not by being the center of it, but by its presence alone. The royal purple dial is paired with white rhodium colored hands and nameplate.
Technical Specifications
Hand finished, made in America dial
39mm Diameter
20mm Lug Width
47mm Lug to Lug
10.5mm Thickness (Caseback to Crystal)
Screw down crown
100m Water Resistance
Movement: Miyota 9039
Crystal Material: Sapphire
Lume: Blue BGW9